Product details
CRYO-FOG High Pressure
Low fog generator to be used with low pressure tank
The CRYO-FOG High Pressure is a powerful low fog generator with 2300 Watt. All build into a compact flightcase (67 x 51 x 30 cm), the CRYO-FOG High Pressure contents a low temperature fog generator, a fan as well as a cooling chamber with space next to the fog generator to held a 5ltr can of fluid.
In general
Liquid CO 2 is used to cool down the fog. Thus, the machine produces thick low fog which distributes equally.
The machine is powerful enough to fill even big stages with low fog within a short time.
The liquid CO 2 is delivered from a high pressure bottle with siphon, which is connected to the machine via a tube (supplied with the machine). The bottles can be rented from companies which sell carbon dioxide.
The intelligent technology ensures that the fogging process will not start before the cooling chamber has reached the right temperature. As a result, no "warm" fog - which will go upwards - can escape from the machine.
The CRYO-FOG High Pressure benefits from its compact size, the low weight, the powerful output, the low noise and the easy operation.
Features
Finest adjustments of the pump
Digital technology ensures fine adjustment of the pump. The output can be adjusted in steps of 1% from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the CRYO-FOG High Pressure to be used in both small and large locations.
Also the fan can be adjusted separately from 0 - 99% if the machine is controlled via DMX. If controlled via analog or stand alone, the fan runs on a pre-programmed level.
DMX 512 as standard
The CRYO-FOG High Pressure can be controlled via DMX 512. The machine needs three following channels on the desk.
Thus, the pump, the fan and also the cooling can be adjusted separately. Therefore the fog output, distribution of the fog and the temperature respectively the height of the fog can be adjusted.
The DMX start address can be adjusted and saved via the control panel. It will be saved even if the machine is disconnected from the mains.
If the CRYO-FOG High Pressure is controlled via DMX 512, the machine can also be used as a "normal" fog generator.
The machine can also be controlled with analog (0 - 10 V) via a desk or via XLR-remote (option).
The fogging process starts automatically as soon as the cooling chamber has reached the right temperature. The fan runs on a pre-programmed level.
A stand-alone-mode is also possible. The pump level can be adjusted directly at the machine, the fan runs on a pre-programmed level. After pushing the start button shortly the machine runs and the fogging process starts as soon as the cooling chamber is cold enough.
LED-display
The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt.
Fluid
A special fluid is needed to run the CRYO-FOG High Pressure.
Advantages
- Fog generator, fan and cooling system in a compact case
- DMX as standard, analogue (0 - 10V) and stand-alone-mode
- In the DMX-mode the pump, the fan and the CO 2-valve can be adjusted separately
- Can be used as a "normal" fog generator in DMX-mode
- Fogging output adjustable in steps of 1% from 0 - 99%
- Low fogging process starts automatically only if the cooling chamber has reached the right temperature
- Easy handling
- Powerful output
- Continuous output
- Easy bottle changing with quick-out connectors
- Made in Germany
Technical data
Procedure
vaporizing fog machine
with cooling chamber
Total requirement
Power requirement
2300 Watt / 1700 Watt (120 V)
2000 Watt / 1400 Watt (120 V)
Voltage
230 V / 50 Hz
120 V / 60 Hz
Warm up time
approx. 7 min.
Fluid consumption
at 100% output
at . 50% output
100 ml/min.
. 40 ml/min.
Liquid CO 2 consumption
at max. output
2 kg/min.
Fluid tank capacity
5 l
Fog output
adjustable in 99 steps
Fogging time
continous output
Control
DMX 512
0 – 10 V analog
Stand-alone-Mode
Temperature control
Microprocessor
Overheating protection
Heater block/thermostat
Pump/Thermal switch
Dimensions (L x W x H)
67 x 51 x 30 mm
Weight
approx. 28 kg
Dimensions


Accessories
- XLR-Remote
Description of the accessories see accessories-site.
Download
<< Return
The CRYO-FOG High Pressure is a powerful low fog generator with 2300 Watt. All build into a compact flightcase (67 x 51 x 30 cm), the CRYO-FOG High Pressure contents a low temperature fog generator, a fan as well as a cooling chamber with space next to the fog generator to held a 5ltr can of fluid.
In general
Liquid CO 2 is used to cool down the fog. Thus, the machine produces thick low fog which distributes equally.
The machine is powerful enough to fill even big stages with low fog within a short time.
The liquid CO 2 is delivered from a high pressure bottle with siphon, which is connected to the machine via a tube (supplied with the machine). The bottles can be rented from companies which sell carbon dioxide.
The intelligent technology ensures that the fogging process will not start before the cooling chamber has reached the right temperature. As a result, no "warm" fog - which will go upwards - can escape from the machine.
The CRYO-FOG High Pressure benefits from its compact size, the low weight, the powerful output, the low noise and the easy operation.
Features
Finest adjustments of the pump
Digital technology ensures fine adjustment of the pump. The output can be adjusted in steps of 1% from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the CRYO-FOG High Pressure to be used in both small and large locations.
Also the fan can be adjusted separately from 0 - 99% if the machine is controlled via DMX. If controlled via analog or stand alone, the fan runs on a pre-programmed level.
DMX 512 as standard
The CRYO-FOG High Pressure can be controlled via DMX 512. The machine needs three following channels on the desk.
Thus, the pump, the fan and also the cooling can be adjusted separately. Therefore the fog output, distribution of the fog and the temperature respectively the height of the fog can be adjusted.
The DMX start address can be adjusted and saved via the control panel. It will be saved even if the machine is disconnected from the mains.
If the CRYO-FOG High Pressure is controlled via DMX 512, the machine can also be used as a "normal" fog generator.
The machine can also be controlled with analog (0 - 10 V) via a desk or via XLR-remote (option).
The fogging process starts automatically as soon as the cooling chamber has reached the right temperature. The fan runs on a pre-programmed level.
A stand-alone-mode is also possible. The pump level can be adjusted directly at the machine, the fan runs on a pre-programmed level. After pushing the start button shortly the machine runs and the fogging process starts as soon as the cooling chamber is cold enough.
LED-display
The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt.
Fluid
A special fluid is needed to run the CRYO-FOG High Pressure.Advantages
- Fog generator, fan and cooling system in a compact case
- DMX as standard, analogue (0 - 10V) and stand-alone-mode
- In the DMX-mode the pump, the fan and the CO 2-valve can be adjusted separately
- Can be used as a "normal" fog generator in DMX-mode
- Fogging output adjustable in steps of 1% from 0 - 99%
- Low fogging process starts automatically only if the cooling chamber has reached the right temperature
- Easy handling
- Powerful output
- Continuous output
- Easy bottle changing with quick-out connectors
- Made in Germany
Technical data
Procedure |
vaporizing fog machine |
Total requirement |
2300 Watt / 1700 Watt (120 V) 2000 Watt / 1400 Watt (120 V) |
Voltage |
230 V / 50 Hz 120 V / 60 Hz |
Warm up time |
approx. 7 min. |
Fluid consumption |
100 ml/min. . 40 ml/min. |
Liquid CO 2 consumption |
2 kg/min. |
Fluid tank capacity |
5 l |
Fog output |
adjustable in 99 steps |
Fogging time |
continous output |
Control |
DMX 512 |
Temperature control | Microprocessor |
Overheating protection |
Heater block/thermostat |
Dimensions (L x W x H) |
67 x 51 x 30 mm |
Weight |
approx. 28 kg |
Dimensions
Accessories
- XLR-Remote
Description of the accessories see accessories-site.
Download
