background - nebelmaschinen
  • Deutsche Version
  • English version
Look Solutions - Fog machines Made in Germany

Product details

VIPER deLuxe

The tour version
The VIPER deLuxe unites a powerful 2600 Watt fog generator and a fan with 400 Watt in a robust flightcase.

A powerful fog output and simple handling are the advantages of the machine.
With a diverter the direction of the output can be changed. Due to this the fog can be fast dustributed within a room.


DMX 512 as standard

The VIPER deLuxe can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs.
The DMX start address can be adjusted and saved via the control panel. Due to the connected fan, the machine uses two following DMX-channels. The fan can also be adjusted via DMX.

The machine can also be controlled with analog (0 - 10 V) via a lighting desk or via XLR-remote (option). This connection is done with 3pin-XLR-plugs.

A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short press at the start button makes the machine run. Therefore a permanent pressing of the start button is unnecessary.

Internal timer

With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %.

Control panel

The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt.

Finest adjustments of the output

Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the Viper deLuxe to be used in both small and large locations.

Flight case

The case on wheels protect the machine and the fan, guarantees easy handling and make a flexible use possible. Four handles for easy transportation. The lids in the front and the back are fixed with butterflys and can be quickly unscrewed. Thus the control panel and the tank housing, which is fixed on the floor, can easily be reached.


  • Fog and air in one case
  • DMX as standard, analog and Stand-alone-Mode
  • Internal timer
  • Simple handling
  • Very powerful output
  • Fog and air output adjustable in 99 steps of 1%
  • Continuous output
  • Fan adjustable separately, can be used as wind machine
  • Made in Germany

Technical data


vaporizing fog generator

Power requirement

2600 Watt


230 V / 50 Hz

Warm up time

approx. 7 min.

Fluid consumption
at max. output
at continuous output

240 ml/min.
. 70 ml/min.

Fluid tank capacity

5 Liter

Fog output

adjustable in 99 steps

Output projection

max. 25 m
Fogging time
at max. outut
at < 50% output

approx. 40 sec.
Continuous output

Air quantity of the internal fan

adjustable in 99 steps


DMX 512
0 – 10 V analog
Radio remote (Option))

Temperature control Microprocessor controlled
Overheating protection

Heater block/thermostat
Pump/Thermal switch

Dimensions (L x W x H)

75 x 42 x 77 cm

Weight with case & fan

approx. 46,7 kg

Technical data fan


Centrifugal blower


230 V / 50 Hz

Air volume

620 m³/h

Power requirement

250 Watt


1.1 A

Capacitor (internal)

8 µF / 400 VDB


fog machine viper deluxe frontfog machine viper deluxe side


  • Ducting adaptor
  • XLR-remote
  • Radio remote

Description of the accessories see accessories-site


The following Look-fluids are available for the Viper deLuxe:

  • Quick-Fog (thick, quick disappearing fluid)
  • Regular-Fog (thick, long lasting fluid)
  • Slow-Fog (thick, extremly long lasting fluid)


Data sheet Viper 2.6_Viper deLuxe.pdf

Manual Viper deLuxe.pdf

Mode d'emploi Viper deLuxe.pdf