background - nebelmaschinen
  • Deutsche Version
  • English version
Look Solutions - Fog machines Made in Germany

Product details


Powerful output
The Viper 2.6 is a very powerful fog generator. It unites the current digital technology with proven technique and power.

Very powerful output, simple handling and the possibility to connect an external fan are the main new features of this machine.


DMX 512 as standard

The VIPER 2.6 can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs.
The DMX start address can be adjusted and saved via the control panel.

The machine can also be controlled with analog (0 - 10 V) via a lighting desk or via XLR-remote (option). This connection is done with 3pin-XLR-plugs.

A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short press at the start button makes the machine run. Therefore a permanent pressing of the start button is unnecessary.

Internal timer

With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %.

Control panel

The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt.

Finest adjustments of the output

Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the VIPER 2.6 to be used in both small and large locations.

Connector for external fan

An external fan with max. 800 Watt can be connected to the VIPER 2.6. Once connected to the machine, the fan can also be adjusted via DMX. The machine then uses two following channels at the desk.


  • DMX as standard, analog and stand-alone-mode
  • Internal timer
  • Fog output adjustable in steps of 1% (0 - 99%)
  • Continuous output
  • Easy handling
  • Powerful output
  • Made in Germany

Technical data


vaporizing fog generator

Power requirement

2600 Watt


230 V / 50 Hz

Warm up time

approx. 7 min.

Fluid consumption
at max. output
at continuous output

240 ml/min.
. 70 ml/min.

Fluid tank capacity

5 Liter

Fog output

adjustable in 99 steps

Output projection

max. 15 m
Fogging time
at max. outup
at < 50% output

approx. 40 sec.
Continuous output

External fan

max. 800 Watt


DMX 512
0 – 10 V analog
Radio remote (option)

Temperature control Microprocessor controlled
Overheating protection

Heater block/Thermostat
Pump/Thermal switch

Dimensions (L x W x H)

52 x 23 x 25 cm

Weight without bottle

approx. 12 kg


fog machine viper 2.6 frontfog machine viper 2.6 side


  • Hanging set (Hanging yoke complete with collecting tray)
  • Ducting adaptor
  • XLR-remote
  • Radio remote
  • Flightcase

Description of the accessories see accessories-site


The following Look-fluids are available for the VIPER 2.6:

  • Quick-Fog (thick, quick disappearing fluid)
  • Regular-Fog (thick, long lasting fluid)
  • Slow-Fog (thick, extremly long lasting fluid)


Data sheet Viper 2.6_Viper deLuxe.pdf

Manual Viper 2.6.pdf

Mode d'emploi Viper 2.6.pdf