background - nebelmaschinen
  • Deutsche Version
  • English version
Look Solutions - Fog machines Made in Germany

Product details

COBRA 3.1

COBRA 3.1

The next generation of fog generators

The Cobra 3.1 is a powerful fog generator, that sets new Standards concerning noise and handling.
The new Touchscreen makes the handling of the Cobra 3.1 easy and intuitive.
Operation via Ethernet and RDM-features allow most flexible use.
The machine is supplied with a duct adaptor that also functions as a protection against contact.


Features

New developed, extremely silent nozzle

With its newly developed nozzle the Cobra 3.1 works very silent. The noise level at full output is 82.5 dBA (in comparison: the Viper 2.6 with 2600 Watt generates 100.5 dBA at full output).

The nozzle can be unscrewed and cleaned as needed.

Two pumps for constant output

The use of two pumps ensures a very constant fog output at any pump level. Therefore the continuous output up to 30% pump level is regulated from one pump, levels from 31% to 100% are regulated by a second, more powerful pump.

New Touchscreen

All adjustments can be made easily and intuitive via the big Touchscreen with simple menu navigation.

New control choices

Beside the stand-alone, analogue and DMX 512 control, the machine can also be operated via Ethernet (Artnet and sACN).

RDM-capable

The Cobra 3.1 is equipped with the following RDM-features:

  • Status: Ready, Re-heating, Error messages (E-1, E-2 etc)
  • DMX-Patch
  • Temperature: Heating element, PCB
  • Adjusting the Personality
  • General Informations about the machine

Finest adjustments of the output

Digital technology enables fine adjustments of the pump. In steps of 1% the output can be adjusted from 0 - 100%. Thus, any desired effect - from a tiny fog cloud to the thickest continuous fog - can be produced. This allows an individual adaptation to the dimensions of the room.

Adjustable pump characteristic

Depending on the use of the Cobra 3.1 and the desired effect, the user can choose between four different pump characteristics: Impulse, Extended, Flood and Continuous.

The output and fogging time varies depending on the choosen pump characteristic.

Adjustable performance curve

For finest adjustments of the pump from 0% - 30%. In thesepump levels, the performance curve can be regulated 5% up or down, if the same output is needed at several machines or the aging process influences the output. Thus, different fog amounts can be balanced.

Internal timer

With the internal timer, the fogging time can be adjsted in seconds, the wait time in minutes and the output in %. Once the timer is activated, the adjusted program will run until the timer is deactivated.

Working hour meter

The Cobra 3.1 is equipped with an working hours counter, that saves heating and fogging durations.

Advantages

  • Extremely silent nozzle
  • Two pumps for strong, constant output
  • Control via Ethernet, DMX 512, analogue (0 - 10 V) and manual mode
  • Internal timer
  • Adjustments via Touchscreen
  • Several RDM features
  • Fog output adjustable from 0 - 100 %
  • Adjustable pump characteristic
  • Adjustable performance curve
  • Wourking hour meter
  • Made in Germany

Technical data

Procedure

vaporizing fog generator

Power requirement

3100 Watt

Voltage

230 V / 50 Hz

Warm up time

approx. 15 min.

Fluid consumption
(measured with Look Regular-Fog)
at max. output
at continuous output



260 ml/min.
  46 ml/min.

Fluid tank capacity

5 Liter

Fog output

adjustable in 100 steps

Output projection

max. 25 m
Fogging time
at max. output

at < 30% output


Extended-Mode: approx. 55 sec.
Impulse-Mode: approx. 22 sec.
Continuous output

Control

Manual
DMX 512
0 – 10 V analogue
Ethernet (Artnet, sACN)
Radio remote (option)
XLR-remote (option) 

Temperature control

Microprocessor controlled

Overheating protection Heater block/Thermostat
Pump/Thermal switch
Dimensions (L x W x H)

58 x 26.5 x 26 cm

Weight without bottle

16 kg
   

Also available with 120 V/60 Hz, 1800 W. Please ask for specifications. 

Dimensions

fog machine COBRA 3.1 frontfog machine COBRA 3.1 side

Accessories

  • XLR-remote
  • Radio remote
  • Flightcase

Description of the accessories see accessories-site

Fluid

The following Look-fluids are available for the Cobra 3.1/Cobra 1.8:

  • Quick-Fog (thick, quick disappearing fluid)
  • Regular-Fog (thick, long lasting fluid)
  • Slow-Fog (thick, extremly long lasting fluid)

Downloads

Data sheet Cobra 3.1

Data sheet Cobra 1.8

Operation manual Cobra 3.1


Back to products