For VIPER series
XLR-Remote
For analogue control.
- 3-pin-XLR-plug
- on/off-button
- Slider to adjust the output
- Mounting plate
- Delivery without cable
- Dimensions incl. Mounting plate (L x W x H):
186 x 32 x 38 mm - Dimensions w/o Mounting plate (L x W x H):
152 x 32 x 38 mm
Hanging set
Hanging yoke complete with collecting tray Hängebügel/Fluidauffangwanne
Available in two versions:
- for Unique 2/2.1
- for Viper nt/Viper 2.6
(The picture shows the Hanging set for Viper nt/Viper 2.6)
Ideal for mounting on fixed installations or stages. The fluid drip tray is firmly connected to the unit. This prevents damage to persons or equipment, e.g. if the fluid canister is leaking.
Radio remote for Viper- and Orka-range, Power-Tiny
With 3-pin-XLR-plug
Transmitter and receiver
Please note: Sample image.
The look can vary.
Duct adaptor for Viper S
Duct adaptor is fixed directly at the machine.Hose diameter = 65 mm
Duct adaptor for Viper nt/2.6
Duct adaptor is fixed directly at the machine.Hose diameter = 100 mm
Flightcase for Viper nt, Viper 2.6
Machine can be fixed with four screws. Box for accessories in the lid.Dimensions ( L x W x H): 55 x 26 x 36.5 cm