background - nebelmaschinen
  • Deutsche Version
  • English version
Look Solutions - Fog machines Made in Germany

Product details

ORKA

ORKA

ORKA power-fog generator 
At the moment, the ORKA is the most powerful fog generator available on the market that is produced as a serial product. It can be used wherever a high quantity of fog is needed in a very short time.

Due to its enormous power and the strong output very large halls and even stadiums can be filled with fog.

The ORKA is the perfect machine for Events, Concerts, Special effects, Theme parks, large TV- and Film-Studios and for Fire brigades or Disaster control examinations.

The compact dimensions and the robust housing the machine make it suitable for touring use.

Features

DMX 512 as standard

The ORKA can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs.
The DMX start address can be adjusted and saved via the control panel.

If an external fan is connected to the machine it can be controlled separately via DMX as well and can be used as a wind machine.

The machine can also be controlled with analog (0 - 10 V) via a lighting desk or via XLR-remote (option). This connection is done with 3pin-XLR-plugs.

A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short press at the start button makes the machine run. Therefore a permanent pressing of the start button is unnecessary.

Internal timer

With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %.

Control panel

The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt.

Finest adjustments of the output

Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the Orka to be used in both small and large locations.

Connector for external fan

An external fan with max. 800 Watt can be connected to the ORKA. Once connected to the machine, the fan can also be adjusted via DMX. The machine then uses two following channels at the desk.

Advantages

DMX as standard, analog and stand-alone-mode

  • Internal timer
  • Fog and air output adjustable in steps of 1% (0 - 99%)
  • Continuous output
  • Easy handling
  • Very powerful output
  • Connector for external fan up to 800 Watt
  • Made in Germany

Technical data

Procedure

vaporizing fog machine

Power requirement

9000 Watt / 8000 Watt (208 V)

Voltage

3 x 230 V with neutral, 50 Hz
1 x 208 V, 60 Hz, 40 A (USA)

Warm up time

approx. 15 min.

Fluid consumption
at 100% output


500 ml/min.

Fog output

adjustable in 99 steps

Output projection

max. 30 m
Fogging time
at max. output
at < 50% output


approx. 2 min
continous output

external Fan

max. 800 Watt
integriated capacitor

Air quantity

adjustable in 99 steps

Control

DMX 512
0 – 10 V analog
Stand-alone-Mode
Radio remote (Option))

Temperature control Microprocessor
two thermocouples
Overheating protection

Heater block/thermostat
Pump/Thermal switch

Dimensions (L x W x H)

55 x 37 x 28 cm

Weight

30 kg

Dimensions

fog machine orka frontfog machine orka side

Accessories

  • XLR-Remote
  • Radio remote

Description of the accessories see accessories-site.

Fluid

The following Look-fluids are available for the Orka:

  • Quick-Fog (thick, quick disappearing fluid)
  • Regular-Fog (thick, long lasting fluid)
  • Slow-Fog (thick, extremly long lasting fluid)

Downloads

Data sheet Orka_Orka/Case.pdf

Manual Orka.pdf

Mode d'emploi Orka.pdf

Manual Orka usa.pdf

 


Back to products