background - nebelmaschinen
  • Deutsche Version
  • English version
Look Solutions - Fog machines Made in Germany

Product details

VIPER S

VIPER S

Compact, strong, small.
The VIPER S with 650 Watt and a powerful output of approx. 8 meters perfectly completes the Viper range.

In general

This fog generator with 650 Watt and an powerful output of approx. 8 meters perfectly completes the Viper range.

The Viper S is made for smaller stages and Clubs. Due to its compact design and the light weight, the machine can also be assembled for mobile uses.

The Viper S is characterised ba a low power- and fluid consumption but a powerful output. Thus, the operating costs are low and the Viper S coincidental is energy-saving without cutting back the output.

Equipped with all features and the usual reliability of the whole Viper range, the Viper S is an inexpensive alternative to bigger machines.

Features

DMX 512 as standard

The VIPER S can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs.
The DMX start address can be adjusted and saved via the control panel.

The machine can also be controlled with analog (0 - 10 V) via a lighting desk or via XLR-remote (option). This connection is done with 3pin-XLR-plugs.

A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short press at the start button makes the machine run. Therefore a permanent pressing of the start button is unnecessary.

A radio remote is also available as an option.

Internal timer

With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes and the output in %.

Control panel

The control panel with LED-display, simple symbols allow for easy operation. It also protects the control buttons against dirt.

Finest adjustments of the output

Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can be produced. This enables the viper nt to be used in both small and large locations.

Advantages

  • DMX as standard, analog and stand-alone-mode
  • Internal timer
  • Fog output adjustable in steps of 1% (0 - 99%)
  • Continuous output
  • Easy handling
  • Powerful output
  • Made in Germany

Technical data

Procedure

Vaporizing fog generator

Power requirement

650 Watt

Voltage

230 V / 50 Hz
120 V / 60 Hz

Warm up time

approx. 7 min.

Fluid consumption
at max. output
at continuous output


60 ml/min.
15 ml/min.

Fluid tank capacity

750 ml

Fog output

adjustable in 99 steps

Output projection

max. 8 m
Fogging time at 100% output
at < 50% output

approx. 22 Sec.
Continuous output

Control

DMX 512
0 – 10 V analog
Stand-alone-Mode
Radio remote (Option))

Temperature control Microprocessor controlled
Overheating protection

Heater block/Thermostat
Pump/Thermal switch

Dimensions (L x W x H)

35 x 18 x 19 cm

Weight without bottle

approx. 5.4 kg

Accessories

  • Ducting adaptor
  • XLR-remote
  • Radio remote
  • Flightcase

Description of the accessories see accessories-site.

Fluid

The following Look-fluids are available for the VIPER S:

  • Quick-Fog (thick, quick disappearing fluid)
  • Regular-Fog (thick, long lasting fluid)
  • Slow-Fog (thick, extremly long lasting fluid)

Downloads

Data sheet Viper S.pdf

Manual Viper S.pdf

Mode d'emploi Viper S.pdf

Manual Viper S usa.pdf

 


Back to products